D1 ISB 11208 TN9 Self Aligning Ball Bearings

Online shopping D1 ISB 11208 TN9 Self Aligning Ball Bearings from a great selection at Store. ... Self Aligning Ball Bearings 81215 Bearing number Accessories.

Bearing number 81215
Brand ISO
Bore Diameter (mm) 75
Outer Diameter (mm) 110
d 75 mm
d1 77 mm
D 110 mm
D1 110 mm
H 27 mm

  • d NKE 2310 Self Aligning Ball Bearings

    Bearing number:71830 C; Size (mm):150x190x20; Brand:ISO; Bore Diameter (mm):150; Outer Diameter (mm):190; Width (mm):20; d:150 mm; D:190 mm; B1:20 mm; C:20 mm; Angle (α):15 °;

    Read More ...

  • 130 mm x 200 mm x 33 mm a NSK 2314 Self Aligning Ball Bearings

    Bearing number:HCB7026-C-2RSD-T-P4S; Size (mm):130x200x33; Brand:FAG; Bore Diameter (mm):130; Outer Diameter (mm):200; Width (mm):33; d:130 mm; D:200 mm; B:33 mm; a:39 mm; Da:189 mm / Tolerance: H12; da:142 mm / Tolerance: h12; r1 min:2 mm; ra max:2 mm; ra1 max:1 mm; rmin:2 mm; α:15 ° / Angle; m:2,62 kg / Weight; Cr:149000 N / Dynamic load rating; C0r:75000 N / Static load rating (; nG Fett:9500 1/min / Limiting speed fo;

    Read More ...

  • 5 mm x 13 mm x 4 mm D KOYO 2222K Self Aligning Ball Bearings

    Bearing number:695ZZ; Size (mm):5x13x4; Brand:ISO; Bore Diameter (mm):5; Outer Diameter (mm):13; Width (mm):4; d:5 mm; D:13 mm; B:4 mm; C:4 mm; r min.:0,2 mm;

    Read More ...

  • Wall Thickness (S3) NMB PBR12FN Self Aligning Ball Bearings

    Bearing number:ASTT90 F20080; Brand:AST; Bore Diameter (mm):200; Outer Diameter (mm):205; Bearing Type:flanged; Shaft Dia., Nominal (d):200.0000; Shaft Size (ds) - 200 -0.170 / -0.216:200 0.170 / 0.216; Housing Bore Dia. (Dh) - 205 +0.046 / -0:205 +0.046 / 0; Bearing Outside Diameter, Nominal(Do):205.000; Bearing Bore after Mounting (di) - 205 +0.115 / -0:205 +0.115 / 0; Wall Thickness (S3):2.500; Bearing Length, Nominal (B):80.000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; OD Chamfer Length (Co):1.800; ID Chamfer Angle (B deg.):45; ID Chamfer Length (Ci):0.600; Flange Dia. (Dfl pm 0.5):235.000; Flange Thickness (Sfl):2.500; Flange Radius (rfl):2.000; Material:Wrapped bronze with lubricatio;

    Read More ...

  • Bearing number Loyal 1311 Self Aligning Ball Bearings

    Bearing number:5546; Brand:Ruville; Designation SKF:VKBA 3469; Designation FAG:713630640; Designation SX:CX500; Compatibility:RENAULT / LAGUNA I (B56_) / e;

    Read More ...

  • 5 inch x 139,7 mm x 6,35 mm Harmonized Tariff Code NKE 2307-K+H2307 Self Aligning Ball Bearings

    Bearing number:CSEA050; Size (mm):127x139.7x6.35; Brand:INA; Bore Diameter (mm):127; Outer Diameter (mm):139,7; Width (mm):6,35; d:5 inch; D:139,7 mm; B:6,35 mm; D1:135 mm; D2:136,4 mm; d1:131,7 mm; rmin:0,6 mm; m:0,11 kg / Weight; Cr:4500 N / Dynamic load rating (; C0r:7500 N / Static load rating (r; Category:Angular Contact Ball Bearing; Inventory:0.0; Manufacturer Name:SCHAEFFLER GROUP; Minimum Buy Quantity:N/A; Weight / Kilogram:0.11; EAN:4012802034202; Product Group:B00308; Enclosure:Open; Flush Ground:No; Rolling Element:Ball Bearing; Number of Rows of Balls:Single Row; Precision Class:ABEC 1 | ISO P0; Maximum Capacity / Filling Slot:No; Snap Ring:No; Cage Material:Brass; Internal Clearance:C0-Medium; Number of Bearings:1 (Single); Inch - Metric:Inch; Long Description:5" Bore; 5-1/2" Outs; Other Features:Thin Section; UNSPSC:31171531; Harmonized Tariff Code:8482.10.50.28; Noun:Bearing; Keyword String:Angular Contact; Weight / LBS:0.24; Outside Diameter:5.5 Inch | 139.7 Millimeter; Width:0.25 Inch | 6.35 Millimeter; Bore:5 Inch | 127 Millimeter;

    Read More ...

  • 120,000 mm x 165,000 mm x 66,000 mm Brand ISB 1316 K+H316 Self Aligning Ball Bearings

    Bearing number:SL11-924; Size (mm):120x165x66; Brand:NTN; Bore Diameter (mm):120,000; Outer Diameter (mm):165,000; Width (mm):66,000; d:120,000 mm; D:165,000 mm; B:66,000 mm; C:66,000 mm;

    Read More ...

  • 80 mm x 125 mm x 22 mm d1 NKE 1320-K+H320 Self Aligning Ball Bearings

    Bearing number:7016 ACE/HCP4AL1; Size (mm):125x80x22; Brand:SKF; Bore Diameter (mm):125; Outer Diameter (mm):80; Width (mm):22; d:80 mm; D:125 mm; B:22 mm; d1:95.83 mm; d2:93 mm; D1:109.17 mm; b:1.8 mm; C1:6.5 mm; C2:3.8 mm; C3:3.8 mm; r1,2 - min.:1.1 mm; r3,4 - min.:0.6 mm; a:35.1 mm; da - min.:86 mm; db - min.:86 mm; Da - max.:119 mm; Db - max.:120.8 mm; ra - max.:1 mm; rb - max.:0.6 mm; dn:98.5 mm; Basic dynamic load rating - C:32.5 kN; Basic static load rating - C0:26.5 kN; Fatigue load limit - Pu:1.1 kN; Limiting speed for grease lubrication:15500 r/min; Limiting speed for oil lubrication:24000 mm/min; Ball - Dw:11.112 mm; Ball - z:25; Gref:12 cm3; Calculation factor - e:0.68; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Calculation factor - Y1:0.92; Preload class A - GA:280 N; Preload class B - GB:850 N; Preload class C - GC:1700 N; Calculation factor - f:1.1; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1.01; Preload class A:198 N/micron; Preload class B:298 N/micron; Preload class C:391 N/micron; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:86 mm; db min.:86 mm; Da max.:119 mm; Db max.:120.8 mm; ra max.:1 mm; rb max.:0.6 mm; Basic dynamic load rating C:32.5 kN; Basic static load rating C0:26.5 kN; Fatigue load limit Pu:1.12 kN; Attainable speed for grease lubrication:15500 r/min; Attainable speed for oil-air lubrication:24000 r/min; Ball diameter Dw:11.112 mm; Number of balls z:25; Reference grease quantity Gref:12 cm³; Preload class A GA:280 N; Static axial stiffness, preload class A:198 N/µm; Preload class B GB:850 N; Static axial stiffness, preload class B:298 N/µm; Preload class C GC:1700 N; Static axial stiffness, preload class C:391 N/µm; Calculation factor f:1.1; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.77 kg;

    Read More ...

  • 80 mm x 125 mm x 22 mm Db max. NSK 1321 Self Aligning Ball Bearings

    Bearing number:7016 ACE/HCP4AL1; Size (mm):125x80x22; Brand:SKF; Bore Diameter (mm):125; Outer Diameter (mm):80; Width (mm):22; d:80 mm; D:125 mm; B:22 mm; d1:95.83 mm; d2:93 mm; D1:109.17 mm; b:1.8 mm; C1:6.5 mm; C2:3.8 mm; C3:3.8 mm; r1,2 - min.:1.1 mm; r3,4 - min.:0.6 mm; a:35.1 mm; da - min.:86 mm; db - min.:86 mm; Da - max.:119 mm; Db - max.:120.8 mm; ra - max.:1 mm; rb - max.:0.6 mm; dn:98.5 mm; Basic dynamic load rating - C:32.5 kN; Basic static load rating - C0:26.5 kN; Fatigue load limit - Pu:1.1 kN; Limiting speed for grease lubrication:15500 r/min; Limiting speed for oil lubrication:24000 mm/min; Ball - Dw:11.112 mm; Ball - z:25; Gref:12 cm3; Calculation factor - e:0.68; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Calculation factor - Y1:0.92; Preload class A - GA:280 N; Preload class B - GB:850 N; Preload class C - GC:1700 N; Calculation factor - f:1.1; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1.01; Preload class A:198 N/micron; Preload class B:298 N/micron; Preload class C:391 N/micron; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:86 mm; db min.:86 mm; Da max.:119 mm; Db max.:120.8 mm; ra max.:1 mm; rb max.:0.6 mm; Basic dynamic load rating C:32.5 kN; Basic static load rating C0:26.5 kN; Fatigue load limit Pu:1.12 kN; Attainable speed for grease lubrication:15500 r/min; Attainable speed for oil-air lubrication:24000 r/min; Ball diameter Dw:11.112 mm; Number of balls z:25; Reference grease quantity Gref:12 cm³; Preload class A GA:280 N; Static axial stiffness, preload class A:198 N/µm; Preload class B GB:850 N; Static axial stiffness, preload class B:298 N/µm; Preload class C GC:1700 N; Static axial stiffness, preload class C:391 N/µm; Calculation factor f:1.1; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.77 kg;

    Read More ...

  • Shaft Dia., Nominal (d) NSK 2308 Self Aligning Ball Bearings

    Bearing number:AST650 506230; Brand:AST; Bore Diameter (mm):50; Outer Diameter (mm):62; Bearing Type:straight; Shaft Dia., Nominal (d):50.0000; Housing Bore Dia. (Dh) - 62 +0.030 / -0:62 +0.030 / 0; Bearing Outside Diameter, Nominal(Do):62.000; Bearing Outside Diameter Tolerance (Do tol.):62 +0.030 / +0.011; Bearing Bore after Mounting (di):50 +0.050 / +0.025; Bearing Length, Nominal (B):30.000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; OD Chamfer Length (Co):2.000; ID Chamfer Angle (B deg.):15; ID Chamfer Length (Ci):1.200; Material:Cast bronze with solid lubrica;

    Read More ...

  • 6 mm x 18 mm x 9 mm Weight NACHI 2206 Self Aligning Ball Bearings

    Bearing number:PB 6; Size (mm):6x18x9; Brand:IKO; Bore Diameter (mm):6; Outer Diameter (mm):18; Width (mm):9; d:6 mm; D:18 mm; B:9 mm; C:6,75 mm; d1:9 mm; dk:12,7 mm; r min.:0,2 mm; Weight:0,013 Kg; Basic dynamic load rating (C):4,2 kN;

    Read More ...

  • 8 mm x 22 mm x 7 mm Brand NSK 135 Self Aligning Ball Bearings

    Bearing number:608/HR22T2; Size (mm):8x22x7; Brand:SKF; Bore Diameter (mm):8; Outer Diameter (mm):22; Width (mm):7; d:8 mm; D:22 mm; B:7 mm; C:7 mm; d1:11,5 mm; r1 min.:0,4 mm; D1:17,9 mm; Weight:0,003 Kg; Basic dynamic load rating (C):0,055 kN; Basic static load rating (C0):0,045 kN;

    Read More ...

  • 130 mm x 230 mm x 40 mm d1 SKF 2312 Self Aligning Ball Bearings

    Bearing number:NUP226; Size (mm):130x230x40; Brand:NTN; Bore Diameter (mm):130; Outer Diameter (mm):230; Width (mm):40; d:130 mm; Fw:156 mm; D:230 mm; B:40 mm; C:40 mm; r min.:3 mm; r1 min.:3 mm; J:165,5 mm; Weight:6,3 Kg; Basic dynamic load rating (C):270 kN; Basic static load rating (C0):340 kN; (Grease) Lubrication Speed:2 900 r/min; E:204 mm; F:156 mm; d1:165.5 mm; rs min:3 mm; r1s min:3 mm; Radial clearance class:CN; Mass (without HJ ring):7.02 kg; Dynamic load, C:270 kN; Static load, C0:340 kN; Fatigue limit load, Cu:34.8 kN; Nlim (oil):3,400 rpm; Nlim (grease):2,900 rpm; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.43 Hz; Characteristic rolling element frequency, BSF:7.37 Hz; Characteristic outer ring frequency, BPF0:7.37 Hz; Characteristic inner ring frequency, BPFI:9.63 Hz; da min:143 mm; dc min:168 mm; Da max:217 mm; ra max:2.5 mm; Category:Bearings; Inventory:0.0; Manufacturer Name:NTN; Minimum Buy Quantity:N/A; Weight / Kilogram:7.025; Product Group:B04144;

    Read More ...

  • 8 mm x 16 mm x 8 mm W AST 2321 Self Aligning Ball Bearings

    Bearing number:SA 8 E; Size (mm):8x16x8; Brand:ISB; Bore Diameter (mm):8; Outer Diameter (mm):16; Width (mm):8; d:8 mm; D:16 mm; B:8 mm; d1:10,2 mm; d2:24 mm; dk:13 mm; h1:42 mm; l1 min.:22 mm; l2 max.:54 mm; l7 min.:14 mm; r min.:0,3 mm; C1:6 mm; W:M8x1,25; Angle:15 °; Weight:0,029 Kg; Basic dynamic load rating (C):5,5 kN;

    Read More ...

  • 160 mm x 240 mm x 76 mm C FAG 2220-K-M-C3 + H320 Self Aligning Ball Bearings

    Bearing number:7032CVDUJ74; Size (mm):160x240x76; Brand:SNR; Bore Diameter (mm):160; Outer Diameter (mm):240; Width (mm):76; d:160 mm; D:240 mm; B:76 mm; C:76 mm; Angle (α):15 °;

    Read More ...